SERVICE MANUAL UPDATE SEC.3A FRONT WHEEL ALIGNMENT SPEC REV

SUBJECT: SERVICE MANUAL UPDATE - SECTION 3A - REVISED FRONT WHEEL ALIGNMENT SPECIFICATION

MODELS AFFECTED: 1993 CENTURY

SERVICE MANUAL UPDATE - SECTION 3A-6

The front wheel caster "Service Checking" alignment specification found in the Service Manual Section 3A-6 for the 1993 Century has been revised. The correct caster "Service Checking" alignment specification is 3 degree +- 1 degree.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.