Coolant Heater Cord Replacement 3.1L

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Disconnect the engine block heater cord from the engine block heater.
3. Remove the engine block heater cord straps.
4. Disconnect the upper engine block heater cord from the diagonal brace strap.
5. Remove the engine block heater cord.

Notice: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine compartment securing with tie straps as necessary to prevent damage.

1. Install the engine block heater cord.
2. Connect the engine block heater cord to the diagonal brace strap.
3. Install the new engine block heater cord straps.
4. Connect the engine block heater cord to the engine block heater.
5. Lower the vehicle.