SERVICE GUILD: SMU STEERING WHEEL REMOVAL

MODELS AFFECTED: 1989 REGALS WITH REDUNDANT STEERING WHEEL CONTROLS, OPTION UK3

The following notice should be inserted following Steering Wheel Removal, Section 3F1 and 3F2:

NOTICE: When removing a steering wheel with redundant electronic accessory controls in the hub, care must be taken to avoid damage to electronic circuits. Wheel puller bolts, used with special tool J 1859-03, should be turned into steering wheel hub no more than five complete turns. This will prevent bolt contact with sensitive electronic circuits.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.