Tools Required

J 41352 Modular Column Holding Fixture

Important: Align the block tooth on the race and upper shaft assembly to the 12 o' clock position.

1. Turn the key to the "OFF" position and remove the key.



2. Put the steering column in J 41352 .
3. Pop the wire harness assembly out of the wire harness strap (1).
4. Check steering column for accident damage. Refer to Steering Column Accident Damage Inspection - Off Vehicle .



5. Use a screwdriver to pry the electrical BTSI actuator from the steering column jacket assembly.
6. Remove the electrical BTSI actuator (3) from the steering column lower support (2) and the shift tube (1).