Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Cigar Lighter/Auxiliary Outlets System Check? | -- | Go to Step 2 | |
2 | Measure the voltage from the accessory power receptacle terminal A and ground. Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 3 |
3 | Check the IP AUX OUTLET fuse. Is the fuse OK? | -- | Go to Step 4 | Go to Step 5 |
4 | Check circuit 739 (PNK) from the IP fuse block to the accessory power receptacle for an open. Is there an open in the circuit? | -- | Go to Step 6 | Go to Step 7 |
5 | Repair the short to ground in circuit 739 (PNK). Is the repair complete? | -- | -- | |
6 | Repair the open or poor connection in circuit 739 (PNK). Is the repair complete? | -- | -- | |
7 | Measure the voltage from the accessory power receptacle terminal A and terminal B. Is the voltage within the specified range? | 10-15 V | Go to Step 8 | Go to Step 9 |
8 | Replace the accessory power receptacle. Is the repair complete? | -- | -- | |
9 | Repair the open or poor connection in circuit 1250 (BLK). Is the repair complete? | -- | -- |
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Cigar Lighter/Auxiliary Outlets System Check? | -- | Go to Step 2 | |
2 | Measure the voltage from the accessory power receptacle terminal A and ground. Is the voltage within the specified range? | 10-15 V | Go to Step 7 | Go to Step 3 |
3 | Check the DR LKS fuse. Is the fuse OK? | -- | Go to Step 4 | Go to Step 5 |
4 | Check circuit 1732 (ORN) from the body control module (MALL) to the accessory power receptacle for an open. Is there an open in the circuit? | -- | Go to Step 6 | Go to Step 7 |
5 | Repair the short to ground in circuit 1732 (ORN). Is the repair complete? | -- | -- | |
6 | Repair the open or poor connection in circuit 1732 (ORN). Is the repair complete? | -- | -- | |
7 | Measure the voltage from the accessory power receptacle terminal A and terminal B. Is the voltage within the specified range? | 10-15 V | Go to Step 8 | Go to Step 9 |
8 | Replace the accessory power receptacle. Is the repair complete? | -- | -- | |
9 | Repair the open or poor connection in circuit 1250 (BLK). Is the repair complete? | -- | -- |