Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Instrument Cluster System Check? | -- | Go to Step 2 | Go to Instrument Cluster System Check |
2 |
Does the driver information center (DIC) HOOD AJAR indicator illuminate? | -- | Go to Step 3 | Go to Step 4 |
3 | Inspect the HOOD AJAR switch connector for proper terminal contact. Is the connector terminal contact OK? | -- | Go to Step 6 | Go to Step 5 |
4 | Inspect for an open in CKT 109 (PNK/BLK). Is the wiring OK? | -- | Go to Step 8 | Go to Step 7 |
5 | Repair the poor terminal contact. Did you complete the repair? | -- | Go to Instrument Cluster System Check | -- |
6 | Replace the HOOD AJAR switch. Did you complete the repair? | -- | Go to Instrument Cluster System Check | -- |
7 | Repair the open in CKT 109 (PNK/BLK). Did you complete the repair? | -- | Go to Instrument Cluster System Check | -- |
8 | Inspect CKT 1150 (BLK) for an open. Is the wiring OK? | -- | Go to Step 10 | Go to Step 9 |
9 | Repair the open in CKT 1150 (BLK). Did you complete the repair? | -- | Go to Instrument Cluster System Check | -- |
10 | Inspect terminal B4 of instrument cluster connector C1 and terminal C5 of C200 for proper terminal contact. Are the connector terminals OK? | -- | Go to Step 11 | Go to Step 5 |
11 | Replace the instrument cluster. Refer to IP Cluster Replacement in Instrument Panel, Gauges and Console. Did you complete the repair? | -- | Go to Instrument Cluster System Check | -- |
