Removal Procedure
- Remove the left sound
insulator. Refer to Left Sound Insulator Replacement.
- Remove the e-clip (3) from the pedal (2).
- Remove the plastic retainer from inside the pedal.
- Remove the accelerator control cable (1) from the pedal by pulling
straight out and up towards the top of the pedal.
- Remove the accelerator pedal from the brake and accelerator pedal
assembly.
Installation Procedure
- Install the accelerator
pedal (2) to the brake and accelerator pedal assembly.
- Install the plastic retainer inside the pedal.
- Install the e-clip onto the pedal.
- Install the accelerator control cable (1) to the pedal by pulling
the pedal straight out and down towards the top of the pedal.
Important: The throttle should operate freely without binding between full closed
and wide open throttle.
- Check for complete throttle opening and closing positions by operating
the accelerator pedal. Also check for poor carpet fit under the accelerator
pedal.
- Install the left sound insulator. Refer to Left Sound Insulator
Replacement.