Removal Procedure
- Remove the seat assembly. Refer to Seat Replacement in Seats.
- Drill out the rivet (1).
- Remove the center belt assembly.
Caution: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
Important: Center belt assembly is riveted to front seat adjusting rail for in-plant assembly and the rivet, does not need to be replaced.
Installation Procedure
- Install the center belt assembly to the seat assembly adjuster rail.
- Install the seat assembly into the vehicle. Refer to Seat Replacement in Seats.
- Install the front seat anchor bolt.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten the outer bolt first then the inner bolt to the specified torque.
Tighten
Tighten the front seat anchor bolts to 40 N·m
(30 lb ft).
