GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1998 🢒 Park Avenue 🢒 Body and Accessories 🢒 Lighting Systems 🢒 Headlamp Control Module Replacement

Removal Procedure
  1. Remove the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gauges, and Console.

    2. Object Number: 262467 Size: SH
  2. Remove the headlamp auto controller connector (3).
  3. Remove the lower retainer bracket from the headlamp auto controller module bracket.
  4. Squeeze the prongs together in order to release the headlamp auto controller module.
  5. Remove the headlamp auto controller module from the mounting bracket by pulling down on the headlamp auto controller module.

Installation Procedure

    Object Number: 262467 Size: SH
  1. Install the headlamp auto controller module on to the bracket by sliding the module upward and slightly rearward into the mounting bracket.

    2. Slide the module into position until the locking tabs engage.

  2. Install the lower retainer bracket to the headlamp auto controller module bracket.

    3. Engage the headlamp auto controller module center prongs into the module bracket center area.

  3. Connect the headlamp auto controller electrical connections (3).
  4. Install the left sound insulator. Refer to Instrument Panel Insulator Panel Replacement in Instrument Panel, Gauges, and Console.