Removal Procedure
- Insert a flat-bladed tool (1) at the rear edge of the access
door in order to disengage the lock tab (2).
- Disengage the forward tabs (1) from the overhead console.
- Disconnect the electrical
connectors.
- Remove the fasteners from the HUD control switch (1) or
the image adjuster switch at the overhead console.
Installation Procedure
- Install the fasteners
to the HUD control switch (2) or the image adjuster switch at the
overhead console.
- Connect the electrical connectors.
- Position the access door. Align the rear tabs (1) into the overhead
console.
- Push upward on the engaging front tab.