Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Did you perform the Audible Warnings System Check? | -- | Go to Step 2 | |
2 |
Is the key in ignition warning chime on? | -- | Go to Step 3 | Go to Step 6 |
3 | Inspect CKT 1845 (LT GRN) for a short to ground. Is CKT 1845 shorted? | -- | Go to Step 4 | Go to Step 5 |
4 | Repair CKT 1845 (LT GRN). Did you complete the repair? | -- | -- | |
5 | Replace the body control module (SBM). Did you complete the repair? | -- | -- | |
6 |
Is the resistance less than the specified value with the key in the ignition, and infinite with the key out of the ignition? | 5 ohms | Go to Step 10 | Go to Step 7 |
7 |
Is the resistance less than the specified value with the key in the ignition, and infinite with the key out of the ignition? | 5 ohms | Go to Step 9 | Go to Step 8 |
8 | Find and repair a short to ground in CKT 80 (LT GRN) within the steering column wiring harness. If the CKT is OK, replace the ignition key warning switch. Did you complete the repair? | -- | -- | |
9 | Repair a short to ground in CKT 80 (LT GRN) between the RFA module connector terminal A9 and C206 terminal B8. Did you complete the repair? | -- | -- | |
10 | Replace the RFA module. Did you complete the repair? | -- | -- |
