For 1990-2009 cars only
Front Vanity Mirror Removal Procedure
- Open the vanity cover (1).
- Use a thin-bladed screwdriver in order to disengage the 5 front snap legs (4) at the lower edge of the sunshade.
- Pull out and down in order to remove the vanity (5).
- Disconnect the wire connectors from the vanity (5), if equipped with a lighted vanity.
Front Vanity Mirror Installation Procedure
- Ensure that the wires are correctly routed.
- Connect the wire connectors to the vanity, if equipped with a lighted vanity.
- Insert the top end of the vanity (5) into the sunshade.
- Engage the snap legs (4).
Rear Vanity Mirror Removal Procedure
- Open the rear vanity mirror.
- Use a flat-bladed tool in order to release the tabs (2) at either side of the mirror assembly (1).
- Pull the mirror assembly down and rearward in order to release the tabs at the front of the assembly.
- Disconnect the 2 electrical connectors.
- Remove the mirror assembly.
Rear Vanity Mirror Installation Procedure
- Connect the electrical connectors.
- Insert the tabs at the front of the mirror assembly (1).
- Press upward on the rear of the mirror assembly (1) in order to engage the tabs (2).
- Close the rear vanity mirror.
