For 1990-2009 cars only
Removal Procedure
- Remove the screw from the center support (1).
- Remove the 3 screws from the outboard side of the sunshade.
- Attach the sunshade to the center support.
- Pull down on the sunshade in order to remove the sunshade from the headliner.
- Partially lower the headliner in order to disconnect the wire connector, if equipped with a lighted vanity mirror.
Installation Procedure
- Connect the electrical connector, if the vehicle is equipped with a lighted vanity mirror.
- Install the sunshade through the openings in the headliner.
- Install the 3 screws on the outboard side of the sunshade.
- Install the screw for the center support (1).
