GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Park Avenue 🢒 Brakes 🢒 Antilock Brake System 🢒 Steering Wheel Position Sensor or Steering Shaft Lower Bearing Replacement

Removal Procedure

    Caution: Refer to SIR Caution in the Preface section.


    Object Number: 667563 Size: SH
  1. Disable the SIR system. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR.
  2. Remove the steering column from the vehicle. Refer to Steering Column Replacement .
  3. Remove the following from the steering shaft:
    4. 3.1. steering shaft seal (7)
    3.2. sensor retainer (6)
    3.3. steering wheel position sensor (5), refer to Steering Wheel Position Sensor Centering .
    3.4. 2 lower spring retainers (4)
    3.5. lower bearing spring (3)
    3.6. lower bearing seat (2)
    3.7. adapter and bearing assembly (1)

Installation Procedure

    Object Number: 667563 Size: SH
  1. Install the following onto the steering shaft:
    2. 1.1. adapter and bearing assembly (1)
    1.2. lower bearing seat (2)
    1.3. lower bearing spring (3)
    1.4. 2 lower spring retainers (4)
    1.5. steering wheel position sensor (5) refer to Steering Wheel Position Sensor Centering .
    1.6. sensor retainer (6)
    1.7. steering shaft seal (7)
    1.8. Enable the inflatable restraint steering wheel module. Refer to in SIR.
  2. Install the steering column to the vehicle. Refer to Steering Column Replacement .
  3. Enable the SIR system. Refer to Inflatable Restraint Steering Wheel Module Coil Replacement in SIR.