GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Park Avenue 🢒 Body and Accessories 🢒 Body Rear End 🢒 Rear Compartment Lid Hinge Replacement

Removal Procedure

    Object Number: 255860 Size: SH
  1. Remove the rear compartment lid. Refer to Rear Compartment Lid Replacement .
  2. Remove the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  3. Remove the torque rods (1) from the hinge (2). Refer to Rear Compartment Lid Hinge Torque Rod Replacement .

    4. Object Number: 255861 Size: SH
  4. Remove the following components from the vehicle:
    5. • The nuts
    • The bolts
  5. Remove the hinge from the vehicle.

Installation Procedure

    Object Number: 255860 Size: SH
  1. Install the hinge (2) to the vehicle.

    2. Object Number: 255861 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the following components to the vehicle:
    3. • The nuts
    • The bolts

    Tighten
    Tighten the nuts and bolts to 24 N·m (18 lb ft).


    Object Number: 255860 Size: SH
  3. Install the torque rods (1) to the hinge. Refer to Rear Compartment Lid Hinge Torque Rod Replacement .
  4. Install the rear shelf trim panel. Refer to Rear Window Shelf Trim Panel Replacement in Interior Trim.
  5. Install the rear compartment lid.
  6. Adjust the rear compartment lid as necessary.

    7. Refer to Rear Compartment Lid Adjustment .