GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 2002 🢒 Park Avenue 🢒 Body and Accessories 🢒 Body Front End 🢒 Hood Rear Outer Seal Replacement

Removal Procedure

    Object Number: 256027 Size: SH
  1. Open the hood.
  2. Pull the rear side hood seal (1) from the pinch-weld flange and motor compartment flange.
  3. Remove the rear side hood seal (1) from the vehicle.
  4. Using 3M™ P/N 8984 Adhesive Remover or equivalent, clean any adhesive from the pinch-weld flange and motor compartment flange surface.

Installation Procedure

    Object Number: 256027 Size: SH
  1. Remove the protective backing paper from the adhesive on the rear side hood seal (1).
  2. Install the rear side hood seal (1) to the pinch-weld flange and motor compartment flange.
  3. Press the side rear hood seal (1) onto the pinch-weld flange and motor compartment flange until the adhesive is fully adhered.
  4. Close the hood.