A detent or canceling spring is broken or missing.

1. Inspect the springs. Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .
2. Replace the components as needed.Refer to Steering Column Tilt Head Housing - Disassemble - Off Vehicle or Steering Column Tilt Head Housing - Assemble - Off Vehicle .

Foreign material or loose parts are obstructing the yoke movement.

1. Clean the components.
2. Inspect the components. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .
3. Replace the components as needed.Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

The switch is not centered inside the column.

1. Inspect the switch and the mounting screw bosses for correct installation.Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .
2. Replace the components as needed.Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Replace the switch if none of the above problems exist. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .