Centering Procedure
- The SIR coil assembly will become uncentered
if the following items occur:
| 1.1. | The steering column is separated from the steering gear and rotates. |
| 1.2. | The centering spring is pushed down and the hub rotates while
the coil is removed from the steering column. |
- After removal of the coil assembly from the steering column, hold
the coil with the bottom facing upward.
- While holding the coil assembly, depress the spring lock in order
to rotate the hub counterclockwise until it stops.
- Ensure the coil ribbon (1) is wound against the center hub.
- Rotate the coil hub clockwise approximately 2 and one half turns.
- Release the spring lock between the locking tabs.
