Console Lamp Replacement Bulb

1. Remove the front floor console and reposition the console slightly rearward. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
2. Grasp the console compartment lamp housing on top of the console compartment, press the housing toward one side and lift the released side.
3. Slide the lamp housing toward the opposite side to release the remaining tab and lift the housing away from the console compartment.
4. Rotate the lamp socket counterclockwise to release from the housing.
5. Remove the bulb from the socket.

1. Install the bulb to the socket.
2. Install the lamp socket to the lamp housing, then rotate clockwise to secure.
3. Insert one side tab of the lamp housing into position on the top of the console compartment.
4. Press the lamp housing toward the installed side and lower the opposite side into position, then release.

Check to be sure that the lamp is secure.

5. Position and install the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.

Console Lamp Replacement Switch

1. Remove the front floor console and reposition the console slightly rearward. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.
2. Disconnect the electrical connector from the console compartment lamp switch.
3. Open the console compartment door.
4. Release the retaining tab on the underside of the switch, while sliding the switch rearward.
5. Lift to remove the switch from the top of the console compartment.

1. Align the console compartment lamp switch to the top of the console compartment.
2. Press the switch into place to secure.
3. Connect the electrical connector to the console compartment lamp switch.
4. Position and install the front floor console. Refer to Front Floor Console Replacement in Instrument Panel, Gauges and Console.