GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Is the vehicle a VIN 1 or VIN K?

--

Go to Step 5

Go to Step 2

2

  1. Shift the transaxle into the PARK position.
  2. Turn the ignition switch to the RUN position.
  3. Disconnect the transaxle range switch connector C1.

Are the backup lamps ON?

--

Go to Step 4

Go to Step 3

3

Adjust or replace the transaxle range switch. Refer to Park/Neutral Position Switch Adjustment .

Has the repair been made and the system rechecked?

--

Go to Backup Lamp System Check

--

4

Repair a short to B+ in circuit 24.

Has the repair been made?

--

Go to Backup Lamp System Check

--

5

Check for BCM DTC's. Refer to Diagnostic System Check - Body Control System .

Are there any DTCs present?

--

Go to Diagnostic System Check - Body Control System

Go to Step 6

6

Remove the backup lamp relay.

Do the backup lamps turn OFF?

--

Go to Step 7

Go to Step 4

7

Replace the backup lamp relay.

Has the repair been made?

--

Go to Backup Lamp System Check

--