GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1999 🢒 Regal 🢒 Body and Accessories 🢒 Interior Trim 🢒 Rear Window Shelf Trim Panel Replacement

Removal Procedure

    Object Number: 323533 Size: SH
  1. From inside the rear compartment, remove the bulb from the high mount stop lamp.

    2. Object Number: 382090 Size: SH
  2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.
  3. Remove the rear seat back. Refer to Rear Seat Back Replacement in Seats.
  4. Remove the rear upper quarter trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  5. Remove the push pins from the panel front.
  6. Lift the panel and remove the seat belts through the slots in the trim panel.
  7. Slide the panel forward to disengage the integral hook from the retaining hole.
  8. Disconnect the electrical cable connector for the high mount stop lamp, located on the passenger end of panel.
  9. Remove the rear shelf.

Installation Procedure

    Object Number: 382090 Size: SH
  1. Slide the panel rearward to engage the integral hook in the retaining hole.
  2. Connect the electrical cable connector for the high mount stop lamp, located on the passenger end of panel.
  3. Connect the electrical cable connector for the high mount stop lamp, located on the passenger end of panel.
  4. Lift the panel and route the seat belts through the slots in the trim panel.
  5. Install the push pins in the panel front.
  6. Install the rear quarter upper trim panel. Refer to Rear Quarter Upper Trim Panel Replacement .
  7. Install the rear seat back. Refer to Rear Seat Back Replacement in Seats.
  8. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement in Seats.

    9. Object Number: 323533 Size: SH
  9. From inside the rear compartment, install the bulb in the high mount stop lamp.