For 1990-2009 cars only
Removal Procedure
- Grasp the switch on the left and right sides.
- Use a small flat-bladed tool in order to disengage the clips which are located at the front and rear of the switch. Hold the flat-bladed tool parallel to the roof and push stright in.
- Rotate the switch toward the left side to disengage it from the mounting bracket and pull down.
- Disconnect the electrical connector from the switch.
- Remove the switch from the vehicle.
Installation Procedure
- Connect the electrical connector to the switch.
- Push the switch firmly into the bracket in order to secure the assembly.
