GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Buick 🢒 1999 🢒 Regal 🢒 Preface 🢒 Cautions and Notices 🢒 Hood Replacement

Removal Procedure
  1. Open the hood.
  2. Mark the upper hood hinge location to the hood using a grease pencil.

    3. Object Number: 317815 Size: SH
  3. Remove the bolts from the upper hood hinge, with the help of an assistant.
  4. Remove the hood from the vehicle, with the help of an assistant.

Installation Procedure

    Object Number: 317815 Size: SH
  1. Position the hood to the vehicle, with the help of an assistant.
  2. Align the hood hinges to the alignment marks on the hood.

    3. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the bolts to the upper hood hinge, with the help of an assistant.

    4. Tighten
    Tighten the hood hinge to hood bolts to 27 N·m (20 lb ft).

  4. Adjust the hood, as required. Refer to Hood Adjustment .