SMU - Revised Frontal or Side Air Bag Inflator Module Replacement
| Subject: | Revised Frontal or Side Air Bag Inflator Module Replacement |
| Models: | 2001-2002 Pontiac Aztek |
| 2002 Buick Rendezvous |
This bulletin is being issued to add the following "Caution" statement to the Frontal and Side Air Bag Inflator Module replacement procedures in the SIR sub-section of the Service Manual. Please add this information to your Service Manual.
This information has been updated within SI2000. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected pages.
When replacing an Inflator Module on the above described vehicles, always refer to the following caution.
Caution: Following the deployment of a frontal or of a side impact air bag, inspect
the following parts for damage. Replace these parts if necessary:
• The seat back trim, if damaged • The seat back pad, if damaged • The seat back frame • The seat cushion frame • The seat adjuster • The seat recliner, if equipped
