Important: Do not allow brake components such as the calipers to hang from the
flexible hoses. This can damage the hoses. Brake hoses may have protective
rings or covers. This is to prevent direct contact of the hose with other
chassis parts. Other than the possible structural damage, excessive tension
can also cause the hose rings to move out of place.
| • | Inspect the hydraulic brake hoses (1) at least twice a
year. |
| • |
Inspect the brake hose
assemblies (5) for the following conditions: |
| - | Cracks and/or chafing of the outer cover |
| - | Proper routing and mounting |
| • | If any of the above conditions are found, adjust or replace the
hose assembly. A brake hose which rubs on other component wears and eventually
fails. |
| • | Use a light and a mirror in order to thoroughly inspect the hose
assemblies. |
