Removal Procedure
- Remove the trim plate from the instrument panel cluster. Refer
to
Instrument Panel Lower Center Trim Replacement
.
- Remove the instrument panel sound insulators. Refer to
Instrument Panel Insulator Replacement
.
- Remove the instrument panel compartment. Refer to
Instrument Panel Compartment Replacement
.
- Remove the screws (1)
and the bolt from the lower trim pad (2) on the instrument panel cluster.
- Remove the lower trim pad (2) from the instrument panel
cluster.
Installation Procedure
- Install the lower trim
pad (2) to the instrument panel cluster.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the screws (1)
and the bolt to the lower trim pad on the instrument panel cluster.
Tighten
Tighten the screws to 2 N·m (17 lb in).
- Install the instrument panel compartment. Refer to
Instrument Panel Compartment Replacement
.
- Install the instrument panel sound insulators. Refer to
Instrument Panel Insulator Replacement
.
- Install the trim plate to the instrument panel cluster. Refer
to
Instrument Panel Lower Center Trim Replacement
.