Removal Procedure
- Remove the rear seat to rear window trim panel. Refer to
Rear Window Trim Panel Replacement
in Body Rear End.
- Disconnect the two wiring
harness connectors from the module (radio signal processor).
- Remove the radio speaker
amplifier bracket (3) bolts from the rear window trim panel.
- Lower the amplifier bracket (3) from the rear parcel shelf.
- Remove the two processor bolts.
- Remove the processor (2) from the amplifier bracket (3).
Installation Procedure
- Install the processor
(2) into the amplifier bracket (3).
- Install the two processor bolts until fully seated and not stripped.
- Raise the amplifier bracket into the mounting position.
- Install the amplifier bracket (3) bolts to the rear window trim
panel until fully seated and not stripped.
- Connect the two wiring
harness connectors.
- Install the rear seat to rear window trim panel. Refer to
Rear Window Trim Panel Replacement
in Body Rear End.