GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 349260  Size: SH
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the front fascia. Refer to Front Bumper Fascia Replacement .
  3. Remove the bolts from the front fascia retainer.
  4. Remove the front fascia retainer.

Installation Procedure


    Object Number: 349260  Size: SH
  1. Install the front fascia retainer.
  2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the front fascia retainer bolts.
  4. Tighten
    Tighten the front fascia retainer bolts to 10 N·m (89 lb in).

  5. Install the front fascia. Refer to Front Bumper Fascia Replacement .
  6. Lower the vehicle.