Removal Procedure
- The boot snaps into the
console. You can remove the boot by gently pulling on the front end of the
boot.
Remove the gear selector boot from the console.
- Remove the power window switch connector.
Important: Do not pry the switch from the console as damage to the console trim
panel may occur.
- Dislodge the switch from the console by reaching under the console opening
near the gear selector.
Installation Procedure
- Install the switch into
the console by firmly seating the switch with your hand.
- Install the power window switch connector.
- Install the gear selector boot to the console by snapping the
console into place.