The remote keyless entry (RKE) feature operates the following
from the outside the vehicle:
The RKE system consists of the following components:
• | The body control module (BCM) |
When you press a button on a transmitter, the transmitter sends a signal
to the BCM. The BCM interprets the signal and activates the requested function.
Unlock Driver's Door Only
Momentarily press the UNLOCK button in order to perform the following
functions:
• | Unlock the driver's door only. |
• | Illuminate the interior lamps for approximately 20 seconds or
until the ignition is turned ON (if the sun sensor senses sufficient darkness). |
• | Disarm the content theft deterrent (CTD) system (if equipped). |
Unlock All Doors (Second Operation)
Momentarily press the UNLOCK button a second time (within 5 seconds
of the first press) in order to perform the following functions:
• | Unlock the remaining doors. |
• | Illuminate the interior lamps for approximately 20 seconds or
until the ignition is turned ON (if the sun sensor senses sufficient darkness). |
• | [Chirp the horn (if selected ON in personalization).] |
Lock All Doors
Press the LOCK button in order to perform the following functions:
• | Lock all of the doors, including the fuel door. |
• | Flash the interior lamps. |
• | [Chirp the horn (if selected ON in personalization).] |
• | Arm the content theft deterrent (CTD) system (if equipped). |
Rear Compartment Lid Release
If the vehicle transaxle is in PARK or NEUTRAL, a single press of the
rear compartment release button will open the rear compartment lid. The interior
lamps will not illuminate.
Fuel Door Release
If the vehicle transaxle is in PARK or NEUTRAL, a single press of the
fuel door release button will unlock the fuel door.
Automatic Door Unlock
Personalization of the RKE
The automatic door unlock feature enables under the following conditions:
• | The ignition switch is in the RUN position. |
• | All the vehicle doors are closed. |
• | The vehicle shifts into the PARK position. |
The BCM receives a signal from the RFA to either enable or disable the
automatic door unlock feature. Use one of the following two different ways
to program the automatic door unlock feature:
• | Use the option register (the dealership uses a scan tool to program
the automatic door unlock feature) to enable or disable the automatic door
unlock feature for all FOBs together. |
• | The BCM is able to differentiate between up to 4 FOBs. |
• | Perform the following steps to program the automatic door unlock
feature using the FOBs: |
1. | Ensure the ignition switch is in the RUN position. |
2. | Ensure the gear shift lever is in the PARK position. |
3. | Press the brake pedal for the entire duration of the procedure. |
4. | Press the transmitter UNLOCK button 4 times within 5 seconds
to disable the automatic door unlock feature. |
5. | Press the transmitter LOCK button 4 times within 5 seconds
to enable the automatic door unlock feature. |
Visual Confirmation Feature