Internal defects in the sun roof actuator will set DTC 50, 51 or 55.
Sun roof actuator hardware failure (EEPROM, RAM or ROM are defective).
DTC 50, 51 or 55 will set and the sun roof actuator will become disabled.
• | DTC 50, 51 or 55 will clear when the fault is no longer present. |
• | DTC 50, 51 or 55 can be cleared by using the scan tool. |
Replace the sun roof actuator.
This step replaces the sun roof actuator.
This step programs the sun roof actuator and also checks for any DTCs that may be present.
Step | Action | Value(s) | Yes | No |
---|---|---|---|---|
1 | Did you perform the Power Sunroof Diagnostic System Check? | -- | ||
2 |
Does the scan tool display DTC 55? | -- | ||
3 | Replace the sun roof actuator. Refer to Power Sunroof Motor Replacement . Is the replacement complete? | -- | -- | |
4 |
Did you correct the condition? | -- | System OK |