Circuit Description
A DTC B1552 indicates that the keep alive or the long term memory in
the Body Control Module (BCM) is reset. It is a normal occurrence whenever
the power or the ground is removed from the BCM. For example: anytime the
battery is disconnected and reconnected.
Conditions for Setting the DTC
The following cause DTC B1552 to set:
• | A loss of battery input to the BCM. |
• | A loss of ground to the BCM. |
Action Taken When the DTC Sets
The BCM memory resets Keep Alive Memory (KAM) to initial default values.
Conditions for Clearing the DTC
• | The conditions for the fault are no longer present. |
• | The use of the scan tool. |
• | A history DTC will clear after 50 consecutive ignition cycles
if the condition for the fault is no longer present. |
Diagnostic Aids
Check the following if DTC B1552 sets without a battery disconnect:
• | Good terminal contact at B3 |
• | Good terminal contact at C1 |
• | A good clean and tight connection at G103. |