GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Catera 🢒 Body and Accessories 🢒 Entertainment 🢒 Steering Wheel Control Switches Replacement

Removal Procedure

    Caution: When you are carrying an undeployed inflator module:

       • Do not carry the inflator module by the wires or connector on the inflator module
       • Make sure the bag opening points away from you
    When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module rests. When you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space for the air bag to expand in case of an accidental deployment. Otherwise, personal injury may result.


    Object Number: 782113 Size: SH
  1. Disable the SIR system. Refer to Disabling the SIR System .
  2. Remove the inflatable restraint steering wheel module from the steering wheel. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  3. Disconnect the electrical connectors (3) for the steering wheel radio control switches (1).
  4. Remove the screws (2) from the steering wheel radio control switches (1).
  5. Remove the steering wheel radio control switches (1) and electrical wire harness from the steering wheel.

Installation Procedure

    Object Number: 782113 Size: SH
  1. Install the steering wheel radio control switches (1) and electrical wire harness to the steering wheel.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the screws (2) to the steering wheel radio control switches (1).

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  3. Connect the electrical connectors (3) for the steering wheel radio control switches (1).
  4. Install the inflatable restraint steering wheel module to the steering wheel. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  5. Enable the SIR system. Refer to Enabling the SIR System in SIR.