Tools Required
J 25070 Heat Gun
Removal Procedure
- Remove the front grill
from the vehicle. Refer to
Grille Replacement
.
- Remove the grille emblem retainer from the grille emblem using
a small flat-bladed tool.
- Heat the grille emblem in a circular motion using the J 25070
.
- Hold the J 25070
at
least 152 mm (6 in) from the grille emblem.
Notice: Use a plastic, flat-bladed tool to prevent paint damage when removing
an emblem/name plate.
- Use a plastic, flat-bladed tool to lift or remove the grille emblem
from the grille.
- Use a 50/50 mixture of isopropyl alcohol and water or a
high flash naphtha to clean the area.
Installation Procedure
Important: DO NOT exceed 40°C (105°F) during the installation of the front
grille emblem.
- Use the J 25070
to
warm the front grille and the front grille emblem to approximatly 26°C
(80°F), if necessary.
- Remove the adhesive backing from the front grille emblem.
- Position the front grille
emblem directly over the molded wreath and crest on the grille.
- Press the front grille emblem onto the grille.
- Pressl the grille emblem retainer onto the grille emblem until
fully seated.
- Install the front grille to the vehicle. Refer to
Grille Replacement
.