GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 2001 🢒 Catera 🢒 Body and Accessories 🢒 Seats 🢒 Rear Seat Back Cushion Inner Hinge Replacement

Removal Procedure
  1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
  2. Remove the rear seat back cushion. Refer to Rear Seat Back Replacement .
  3. Remove the rear seat back center armrest. Refer to Rear Seat Armrest Replacement .

    4. Object Number: 246253 Size: SH
  4. Remove the rear seat back inner hinge bolt and nut from armrest support.
  5. Remove the rear seat back inner hinge.

Installation Procedure

    Object Number: 246253 Size: SH
  1. Install the rear seat back inner hinge.

    2. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  2. Install the rear seat back hinge bolt and nut to armrest support.

    3. Tighten
    Tighten the rear seat back inner hinge bolt and nut to 20 N·m (15 lb ft).

  3. Install the rear seat back center armrest. Refer to Rear Seat Armrest Replacement .
  4. Install the rear seat back cushion. Refer to Rear Seat Back Replacement .
  5. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .