For 1990-2009 cars only
SMU - Revised Wheel Alignment Specifications
| Subject: | Revised Wheel Alignment Specifications |
| Models: | 2006 Cadillac DTS |
This bulletin is being issued to revise the Wheel Alignment Specifications in the Wheel Alignment sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.
The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.
Suspension | Camber | Camber Cross Tolerance | Caster | Caster Cross Tolerance | Total Toe | Steering Wheel Angle | Thrust Angle |
|---|---|---|---|---|---|---|---|
FE1, FE3, FE7 | |||||||
Front | -0.00° ± 0.75° | ± 0.75° | 5.80° ± 0.75° | ± 0.75° | 0.20° ± 0.20° | 0.00° ± 3.50° | -- |
Rear | -0.05° ± 0.75° | -- | -- | -- | 0.10° ± 0.20° | -- | 0.00° ± 0.20° |
