GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 DeVille 🢒 Brakes 🢒 Hydraulic Brakes 🢒 Brake Pedal Replacement

Removal Procedure

    Object Number: 161413 Size: SH
  1. Remove the left hand sound insulator.
  2. Remove the central power supply and the mounting bracket.
  3. Remove the upper pivot bolt.
  4. Remove the bushings and spacer.
  5. Remove the retainer and washer from the pedal stud.
  6. Disengage the booster pushrod from the pedal stud.
  7. Remove the pedal from the car.

Installation Procedure

    Object Number: 161413 Size: SH
  1. Position the pedal in the car.
  2. Position the booster pushrod on the pedal.
  3. Install the washer and retainer.
  4. Install the bushings and spacer.
  5. Install the upper pivot bolt.

    6. Tighten
    Tighten the pivot bolt to 45 N·m (33 lb ft).

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  6. Connect the central power supply.
  7. Install the bracket
  8. Install the left hand sound insulator.