GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Cadillac 🢒 1998 🢒 DeVille 🢒 Restraints 🢒 Seat Belts 🢒 Front Seat Center Belt Replacement

Removal Procedure

    Object Number: 161014 Size: SH
  1. Move the seats full forward.
  2. Remove the seat anchor bolts.
  3. Raise the seat assembly and support the assembly to gain access to the bottom of the inner rear adjuster track.
  4. Drill out the rivet.
  5. Remove the belt assembly.

Installation Procedure

    Object Number: 161014 Size: SH
  1. Lower the seat assembly.
  2. Align the rear seat track holes.
  3. Slip the belt attachment bracket under the track and align with the anchor bolt holes.

    4. Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  4. Install the anchor bolts.

    5. Tighten
    Tighten the anchor bolts to 30 N·m (22 lb ft).

  5. Reposition the seat.