Rear Seat Belt Replacement DeVille
Removal Procedure
- Open the rear doors.
- Remove the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.
- Remove the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Remove the lower seat belt anchor bolt.
- Remove the quarter trim panel. Refer to
Rear Quarter Upper Trim Panel Replacement
in Interior Trim.
- Remove the seat belt guide
loop bolt.
- Remove the retractor anchor bolts.
- Remove the belt assembly from the vehicle.
Installation Procedure
- Position the belt assembly
to the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the retractor
anchor bolts.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Position the guide loop.
- Install the guide loop bolt.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Install the quarter trim panel. Refer to
Rear Quarter Upper Trim Panel Replacement
in Interior Trim.
- Install the lower seat belt anchor bolts.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Install the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Install the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.
- Close the rear doors.
Rear Seat Belt Replacement Eldorado
Removal Procedure
- Open the doors.
- Remove the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.
- Remove the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Remove the lower seat
belt anchor bolt.
- Remove the quarter trim panel. Refer to
Rear Quarter Upper Trim Panel Replacement
in Interior Trim.
- Remove the retaining guide loop bolt and loop.
- Remove the retractor anchor bolts.
- Remove the belt assembly from the vehicle.
Installation Procedure
- Install the retractor
assembly to the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners
must be the correct part number for that application. Fasteners requiring
replacement or fasteners requiring the use of thread locking compound or sealant
are identified in the service procedure. Do not use paints, lubricants, or
corrosion inhibitors on fasteners or fastener joint surfaces unless specified.
These coatings affect fastener torque and joint clamping force and may damage
the fastener. Use the correct tightening sequence and specifications when
installing fasteners in order to avoid damage to parts and systems.
- Install the retractor
anchor bolts.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Install the belt guide loop and bolt.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Install the quarter trim panel. Refer to
Rear Quarter Upper Trim Panel Replacement
in Interior Trim.
- Install the lower seat belt anchor bolts.
Tighten
Tighten the bolt to 41 N·m (30 lb ft).
- Install the rear seat back. Refer to
Rear Seat Back Replacement
in Seats.
- Install the rear seat cushion. Refer to
Rear Seat Cushion Replacement
in Seats.
- Close the doors.