Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
1 | Was the Wiper/Washer System Check performed? | -- | Go to Step 2 | |
2 | Inspect the WIPERS fuse A9 for an open. Is the fuse open? | -- | Go to Step 3 | Go to Step 4 |
3 | Replace the WIPERS fuse. Is the replacement complete? | -- | -- | |
4 |
Is the test light on? | -- | Go to Step 16 | Go to Step 5 |
5 | Connect a test light from Accessory Relay, terminal A1, to ground. Is the test light on? | -- | Go to Step 6 | Go to Step 11 |
6 | Connect a test light from Accessory Relay, terminal A3, to ground. Is the test light on? | -- | Go to Step 7 | Go to Step 12 |
7 | Connect a test light from Accessory Relay, terminal B1 to terminal A3. Is the test light on? | -- | Go to Step 8 | Go to Step 15 |
8 | Inspect CKT 143 for an open or poor connection between connector C202 and the Accessory Relay. Was an open or poor connection found? | -- | Go to Step 9 | Go to Step 10 |
9 | Repair the open or poor connection in CKT 143. Is the repair complete? | -- | -- | |
10 | Replace the the Accessory Relay. Is the replacement complete? | -- | -- | |
11 | Repair the open in CKT 1040 or the power feed circuit to the WIPERS fuse. Is the repair complete? | -- | -- | |
12 | Inspect the ACC fuse C13 for an open. Is the fuse open? | -- | Go to Step 13 | Go to Step 14 |
13 | Replace the ACC fuse. Is the replacement complete? | -- | -- | |
14 | Repair the open in CKT 43 or the power feed circuit to the ACC fuse. Is the repair complete? | -- | -- | |
15 | Repair the open in CKT 50. Is the repair complete? | -- | -- | |
16 |
Is the test light on? | -- | Go to Step 18 | Go to Step 17 |
17 | Repair the open in CKT 750. Is the repair complete? | -- | -- | |
18 |
Is the test light on? | -- | Go to Step 22 | Go to Step 19 |
19 | Inspect for an open in CKT 95. Was an open found? | -- | Go to Step 20 | Go to Step 21 |
20 | Repair the open in CKT 95. Is the repair complete? | -- | -- | |
21 | Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle . Is the replacement complete? | -- | -- | |
22 |
Is the test light on? | -- | Go to Step 25 | Go to Step 23 |
23 | Inspect for an open in CKT 91. Was an open found? | -- | Go to Step 24 | Go to Step 21 |
24 | Repair the open in CKT 91. Is the repair complete? | -- | -- | |
25 | Inspect for continuity between wiper motor connector C1, terminal A, and connector C2, terminal B, with a J 39200. Is there continuity? | -- | Go to Step 26 | Go to Step 29 |
26 | Inspect for a poor connection at wiper motor connector C2, terminal A. Was a poor connection found? | -- | Go to Step 28 | Go to Step 27 |
27 | Replace the wiper motor. Refer to Windshield Wiper Motor Replacement . Is the replacement complete? | -- | -- | |
28 | Repair the poor connection. Is the repair complete? | -- | -- | |
29 | Inspect for an open in CKT 196. Was an open found? | -- | Go to Step 30 | Go to Step 21 |
30 | Repair the open in CKT 196. Is the repair complete? | -- | -- |
