GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Was the Wiper/Washer System Check performed?

--

Go to Step 2

Go to Wiper/Washer System Check

2

  1. Disconnect wiper motor connector C1.
  2. Turn the ignition switch ON.
  3. Set the wiper switch to LO.
  4. Connect a test light from connector C1, terminal B, to ground.

Is the test light on?

--

Go to Step 5

Go to Step 3

3

Inspect for an open in CKT 91.

Was an open found?

--

Go to Step 4

Go to Step 8

4

Repair the open in CKT 91.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

5

Connect the test light from connector C1, terminal C, to ground.

Is the test light on?

--

Go to Step 9

Go to Step 6

6

Inspect for an open in CKT 95.

Was in open found?

--

Go to Step 7

Go to Step 8

7

Repair the open in CKT 95.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

8

Replace the wiper/washer switch. Refer to Multifunction Turn Signal Lever Replacement - On Vehicle .

Is the replacement complete?

--

Go to Wiper/Washer System Check

--

9

  1. Disconnect wiper motor connector C2.
  2. Inspect for continuity between wiper motor connector C1, terminal A, and connector C2, terminal B, with a J 39200.

Is there continuity?

--

Go to Step 11

Go to Step 10

10

Repair the open in CKT 196.

Is the repair complete?

--

Go to Wiper/Washer System Check

--

11

Replace the wiper motor cover. Refer to Wiper Motor Cover Replacement .

Is the replacement complete?

--

Go to Wiper/Washer System Check

--