Removal Procedure
- Remove the IP storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
.
- Release the retainers fastening the instrument panel storage compartment
switch plate bezel.
Remove the bezel.
- Squeeze the switch retainers.
Pry out the switch from the instrument panel storage compartment.
Remove the necessary switch:
• | Rear compartment lid release enable switch |
• | IP storage compartment lamp switch |
• | Traction control switch |
Installation Procedure
- Install the switch to
the instrument panel storage compartment switch hole.
Push the switch inward to fasten.
- Align the instrument panel storage compartment switch plate bezel
to the storage compartment.
Push inward to fasten the bezel.
- Install the IP storage compartment. Refer to
Instrument Panel Storage Compartment Replacement
.