Removal Procedure
Note the cable routing for cable replacement.
- Remove the cruise control
cable from the retainer (1) at the left strut tower.
- Disconnect the cruise
control cable retainer (1) from the throttle body cam.
- Disconnect the cruise control cable retainer (3) from the
throttle body bracket.
- Disconnect the cruise
control cable from the cruise control module (1).
Turn the cable lock (3) until the cable disengages from the module (1).
- Release the cable (2) from the connector on the module
cord (4).
- Remove the cruise control cable.
Installation Procedure
Important: The nylon cord from the module must be flat. The cord must not be twisted.
- Connect the cruise control cable (2) to the cruise control module
cord connector (4).
- Seat the cable end (3) into the module (1).
Turn the cable until the cable is locked to the module (1).
- Connect the cruise control
cable retainer (3) to the throttle body bracket.
- Connect the cruise control cable retainer (1) to the throttle
body cam.
- Install the cruise control
cable to the retainer (1) on the left strut tower.
- Adjust the cruise control cable. Refer to
Cruise Control Cable Adjustment
.