Removal Procedure
- Remove the mirror and
the plastic backing plate (6).
Pull the assembly out of the mirror housing (3).
- Remove the jack screws (1) snapped into the mirror head
backing.
Installation Procedure
- Snap the jack
screws (1) into the new mirror backing plate (2).
- Align the jack screws (1) into the power drive unit (4).
Push the mirror assembly in close to the power drive unit (4).
- Align the swivel (6) on the power drive unit (4)
to the pivot points in the mirror backing plate.
Push in the backing plate until a click is heard.