Rear Side Door Trim Panel Replacement DeVille

1. Remove the power window switch assembly. Refer to Front Side Door Window Switch Replacement .
2. Remove the hidden fasteners (2).
3. Remove the door trim plate. Refer to Door Inside Handle Bezel Replacement .



4. Remove the door trim panel (1) by lifting up and out in order to disengage the hooks from the door.
5. Disconnect the electrical connector.

1. Connect the electrical connector.
2. Perform the following steps in order to install the door trim panel (1):

2.1.	Align the hooks with the door.

2.2.	Push in and down on the trim panel.

Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

2.3.	Install the fasteners (2).

Tighten
Tighten the fasteners (2) to 1.5 N·m (13 lb in).

3. Install the door trim plate. Refer to Door Inside Handle Bezel Replacement .
4. Install the power window switch assembly. Refer to Front Side Door Window Switch Replacement .