GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Remove the body lock pillar trim. Refer to Body Lock Pillar Trim Replacement in Interior Trim.
  2. Partially remove the rear carpet retainer. Refer to Carpet Retainer Replacement in Interior Trim.
  3. Separating the rear carpet retainer from the front carpet retainer is not necessary.


    Object Number: 319674  Size: MH
  4. Pull the door opening weatherstrip (1) from the flange (2).

Installation Procedure


    Object Number: 319674  Size: MH
  1. Position the alignment mark at the upper front corner of the door opening.
  2. Install the weatherstrip (1) to the flange (2).
  3. Push the weatherstrip (1) until the weatherstrip is fully seated.

  4. Install the rear carpet retainer. Refer to Carpet Retainer Replacement in Interior Trim.
  5. Install the body lock pillar trim. Refer to Body Lock Pillar Trim Replacement in Interior Trim.