Removal Procedure
- Cycle the glass panel to the rear.
- Push the pin (5) out of the deflector
lift arm bracket.
Important: Note the position of the springs (3) before removal in order
to ensure proper operation after assembly.
- Remove the spring (3).
- Raise the deflector lift arm to the vertical position.
- Snap the molded pin (5) out of the bracket (4).
Installation Procedure
Important: In order to ensure a secure fit, slightly squeeze the bracket arms (1)
together using pliers.
- Install the pin in the deflector arm.
Important: Return the springs to the position noted during removal.
- Install the spring (3) and the pin (5)
in the deflector lift arm (one per side.