GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 602311  Size: MH
  1. Remove the vacuum connections from the AIR check valve.
  2. Remove the AIR Vacuum Control Solenoid from the rear AIR check valve bracket.
  3. Loosen and lower the pinch clamp holding the AIR exhaust hose to the rear AIR check valve.

  4. Object Number: 602315  Size: MH
  5. Remove the nuts retaining the AIR exhaust hose to the AIR check valve bracket.
  6. Remove the AIR exhaust hose from the AIR check valve.
  7. Remove the nuts retaining the AIR check valve to exhaust manifold pipe to the exhaust manifold.
  8. Remove the bolts retaining the AIR check valve bracket to the engine.
  9. Remove the AIR check valve and exhaust manifold pipe.
  10. Remove the exhaust manifold pipe from the AIR check valve.

Installation Procedure


    Object Number: 602315  Size: MH
  1. Install the exhaust manifold pipe to the rear AIR check valve.
  2. Tighten
    Tighten the nuts to 9 N·m (80 lb. in.)

  3. Install the exhaust manifold pipe, gasket, and retaining nuts to the exhaust manifold.
  4. Install the bolts retaining the AIR check valve bracket to the engine.
  5. Tighten
    Tighten the nuts and the bolt to 9 N·m (80 lb. in.)

    Tighten
    Tighten the exhaust manifold pipe nuts to 9 N·m (80 lb. in.)

  6. Install the AIR exhaust hose and clamp to the AIR check valve.
  7. Tighten
    Tighten the nuts retaining the AIR exhaust hose to the AIR bracket to 9 N·m (80 lb. in.)

  8. Install the AIR Vacuum Control Solenoid to the AIR check valve bracket.
  9. Tighten
    Tighten the nuts and the bolt to 9 N·m (80 lb. in.)


    Object Number: 602311  Size: MH
  10. Reconnect the AIR vacuum connections.