The number(s) below refer to the step number(s) on the diagnostic table.
Lack of communication may be due to a partial malfunction of the class 2 serial data circuit or due to a total malfunction of the class 2 serial data circuit. The specified procedure will determine the particular condition.
The symptoms list in Symptoms will determine the correct diagnostic procedure.
The presence of DTCs which begin with "U" indicate some other module is not communicating. The specified procedure will compile all the available information before tests are performed.
The presence of DTCs B1000, B1004, B1007, or B1009 indicates an internal module fault.
The presence of DTCs B1327 or B1328 indicates a high or low voltage condition.
Step | Action | Yes | No | ||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Install a scan tool. Does the scan tool power up? | Go to Step 2 | |||||||||||||||||||||||
Does the scan tool communicate with the all the listed modules? | Go to Step 3 | ||||||||||||||||||||||||
Select the display DTCs function on the scan tool for the following modules:
Does the scan tool display any DTCs? | Go to Step 4 | Go to Symptoms | |||||||||||||||||||||||
Does the scan tool display any DTCs which begin with a "U"? | Go to Step 5 | ||||||||||||||||||||||||
Does the scan tool display DTC B1000, B1004, B1007, or B1009? | Go to Step 6 | ||||||||||||||||||||||||
Does the scan tool display DTC B1327 or B1328? |