GM Service Manual Online
For 1990-2009 cars only

Step

Action

Value(s)

Yes

No

1

Did you perform the Lighting Systems Diagnostic System Check?

--

Go to Step 2

Go to Diagnostic System Check - Lighting Systems

2

  1. Install a scan tool.
  2. Turn the ignition ON, with the engine OFF.
  3. Turn ON the parklamps.
  4. With a scan tool, observe the park lamp input parameter in the DIM data list.

Does the park lamp input parameter show ON?

--

Go to Step 3

Go to Step 5

3

With a scan tool, observe the incandescent dim #1 output parameter.

Does the incandescent dim #1 output parameter show within the specified range?

15-96%

Go to Step 4

Go to Step 6

4

Repair an open or high resistance in the incandescent dimming output circuit. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Step 7

--

5

Repair an open or high resistance in the park lamp input circuit. Refer to Wiring Repairs in Wiring Systems.

Did you complete the repair?

--

Go to Step 7

--

6

Replace the dash integration module (DIM). Refer to Dash Integration Module Replacement in Body Control System.

Did you complete the replacement?

--

Go to Step 7

--

7

Operate the system in order to verify the repair.

Did you correct the condition?

--

System OK

Go to Step 2